FTTH Sc Fast Connector Fiber Optical Connector/Fiber Optic Fast Connector

Basic Info.

Model NO.	SC Fast Connector
Ferrule Endface	PC(UPC)
Shape	Square
Fabrication Process	Moulded
Application	Fiber Distribution Frame, Network Equipment, Fiber Module
Light Source TYPE	Laser
Connector Type	SC-PC
Brand	OEM
Certificate	Ce, RoHS
Coating Diameter	250um
Service	Perfect After-Sale Service
Shipment	by Sea, Air Cargo, DHL, UPS, EMS etc.
Payment Term	T/T, Western Union, L/C, Paypal etc.
Fiber Mode	Sm or mm
Fiber Diameter	125um
Polish	Upc/APC
Connector	Sc,FC,St,LC Optional
Type	Sc Fast Connector
Transport Package	Blister Box
Specification	Sc Fast Connector
Trademark	Takfly
Origin	Shenzhen, China
HS Code	8536700000
Production Capacity	10000PCS/Day

Product Description

What is Fast Connector/Fiber Optical Connector/Fiber Optic Fast ConnectorOptical fiber quick connector is also called quick connection in the industry, also called field assembled optical fiber active connector. This kind of connector is small in size and fast in termination. The basic termination process only takes 2 minutes, and it is widely used, such as Corridors and household cables have a particularly high utilization rate, so they are widely welcomed by the market. In this article, I will briefly introduce the optical fiber quick connector to the world network.Optical fiber quick connectors are also called optical fiber field connectors. They are the same product and are divided into one generation, two generations and three generations, also known as direct embedded direct fusion. Their main differences are:1. For the straight-through type, it mainly belongs to the dry structure. This structure is very simple. The advantage is that it is easier to implement and the cost is low, but there are many disadvantages: strict requirements for the diameter of the fiber, strict requirements for the cutting end face and cutting length, The requirements for the strength of the blessing are more stringent; otherwise, any mismatch with the product will cause fluctuations in the parameters; in addition, because the return loss index completely depends on the condition of the fiber cut end face, the return loss index of the product is relatively poor, and the operator is skilled High expectations. This type of product structure can be used for temporary optical fiber link repair, but it is not suitable for large-scale use of FTTH access links.2. For the pre-embedded optical fiber quick connector, it belongs to the pre-embedded fiber structure. The pre-embedded fiber structure adopts a section of bare fiber pre-inserted into the ceramic ferrule in the factory, and the top is ground and operated. The operator only needs to cut the other end of the fiber and insert it at the scene; because the pre-embedded fiber factory in front of the pre-embedded structure is ground and the butt joint is filled with matching liquid, it does not rely too much on the flatness of the fiber end face cutting, which greatly reduces the operator's proficiency. Because the end face of the connector adopts the pre-grinding process, the return loss index is good; the product structure can achieve better insertion loss (below 0.5dB) and return loss (above 45dB) index, reliability Compared with the stability, it is suitable for the indoor node of FTTH access link.How to install and use optical fiber quick connectors?1. Remove the connector end cap and pass the cable through it;2. Use optical fiber strippers to strip the cable sheath, the length is about 5CM;3. Cut the exposed coating layer with the Miller clamp close to the edge of the fixture to expose the optical fiber;4. Wipe and clean the bare fiber with a dust-proof cloth;5. Use a fixture to cut the optical fiber;6. Align the optical fiber with the main body hole and insert it. When the optical fiber is initially bent, press the crimping cover down;7. Screw the tail cover on the cable back to the main body of the connector and then fasten the shell.The above is about the use steps of the light quick connector, I hope it can help you clear your doubts. Optical fiber quick connector is also called "univer joint", from this name, we can realize its flexible and convenient use. Of course, there are many types of optical fiber quick connectors, and different types of optical fiber quick connectors have different materials, performance, low stability, and service life.Applications:Fast Ethernet,Data Communication LAN and WANHigh speed Enterprise serversMultiplexers,switches and routersOptical Access and ATM Networks EquipmentOptical Transport and Telecommunications,FTTH,FTTD,FTTXSwitching EquipmentParameter:

Series	SC/APC SC/UPC
Applicable cable	P3 X 2 Rubber-insulated wire	Φ3.0 Fiber
Fiber diameter	125μm	125μm
Coating Diameter	250μm	250μm
Fiber mode	SM OR MM	SM OR MM
Installation time	≤40S	≤40S
Construction site installation rate	≥99%	≥99%
Insertion loss	≤0.5dB(typical value≤ 0.8dB)(1310nm or 1550nm)	≤0.5dB(typical value≤ 0.8dB)(1310nm or 1550nm)
Return loss	45dB(average 50dB)	45dB(average 50dB)
Tensile strength	>30	>20
Working temperature	-40°C~+70 °C	-40°C~+70 °C
Reusability	≥50	≥50
Normal life	30 years	30 years

Our workshopOur certificatesExhibitionsIf you have any interest, please feel free to contact us